Brass 14" Smooth Brass Round Sink w/ Drain
$269.99
Product Description:
Includes : 14" Brass Round Bath Sink / or Bar / Beverage Sink - Smooth interior - lip is hammered, but not seen if under mounting or under counter mount.
Solid Brass Drain hand finished in our shop to match your sink finish &
Carnauba Wax and Polishing Cloths - Included - Everything you need!
*** Everyone is asking for smooth unhammered, I am adding new products every week as we make them. Our duo sinks have hammered lips on them because we use metal spinning to make our a lot of our product. Remember these are handmade, not pressing into shape or stamped. There are going to be slight imperfections in the surface of the sink due to producing them entirely by hand.
I suggest ordering polished and I will include our Professional Burnishing P96 pads if you want to adjust to a light matte or matte finish. just add note to add burnishing pads or just send me a message etc ect.
Unhammered solid Brass Round Bath/ Bar/ Powder Bath/ Beverage & anywhere you need a smaller sized sink... 14" made by Santa Clara Brass. Hand Made by our skilled artisans in our own shop in Santa Clara del Cobre, which specializes in hammered and smooth Brass products. All of our brass sink finishes are living finishes and will age naturally, they are non-lacquered, but come sealed with a natural beeswax polish we made in-house at our shop.
Care and Maintenance:
Shiny and matte finishes will naturally oxidize and tarnish, and the antique/ weathered brass finish can lighten over time with excessive use. You can use Barkeepers Friend and or a natural deoxidizer polishing paste like lemon juice and salt or in Mexico we use Valentina hot sauce (similar to Tasbasco hot sauce), to remove tarnish from a shiny sink. Most bronze and brass statues throughout Mexico are maintained by municipalities using hot sauce. A little paste wax and or beeswax polish will help maintain the finish longer.
Do not clean Antique / Weathered Brass with brass cleaners as they will lighten the finish. Mild soap and water is all that you need. 000 Steel Wool / or a green scour pad can be used to burnish tarnish off these finishes.
Outside Dim 14"x 14"x 4.5"
Inside Dim 12"x 12"
Drain Opening 1 1/2" Opening - with drain INCLUDED ( American Standardized sizing and install / as well as Metric)
Edge Detail 1" Flat Edge
Mount Type Surface or under counter mount
Made by hand by Santa Clara Brass Hammered Brass Products
Includes : 14" Brass Round Bath Sink / or Bar / Beverage Sink - Smooth interior - lip is hammered, but not seen if under mounting or under counter mount.
Solid Brass Drain hand finished in our shop to match your sink finish &
Carnauba Wax and Polishing Cloths - Included - Everything you need!
*** Everyone is asking for smooth unhammered, I am adding new products every week as we make them. Our duo sinks have hammered lips on them because we use metal spinning to make our a lot of our product. Remember these are handmade, not pressing into shape or stamped. There are going to be slight imperfections in the surface of the sink due to producing them entirely by hand.
I suggest ordering polished and I will include our Professional Burnishing P96 pads if you want to adjust to a light matte or matte finish. just add note to add burnishing pads or just send me a message etc ect.
Unhammered solid Brass Round Bath/ Bar/ Powder Bath/ Beverage & anywhere you need a smaller sized sink... 14" made by Santa Clara Brass. Hand Made by our skilled artisans in our own shop in Santa Clara del Cobre, which specializes in hammered and smooth Brass products. All of our brass sink finishes are living finishes and will age naturally, they are non-lacquered, but come sealed with a natural beeswax polish we made in-house at our shop.
Care and Maintenance:
Shiny and matte finishes will naturally oxidize and tarnish, and the antique/ weathered brass finish can lighten over time with excessive use. You can use Barkeepers Friend and or a natural deoxidizer polishing paste like lemon juice and salt or in Mexico we use Valentina hot sauce (similar to Tasbasco hot sauce), to remove tarnish from a shiny sink. Most bronze and brass statues throughout Mexico are maintained by municipalities using hot sauce. A little paste wax and or beeswax polish will help maintain the finish longer.
Do not clean Antique / Weathered Brass with brass cleaners as they will lighten the finish. Mild soap and water is all that you need. 000 Steel Wool / or a green scour pad can be used to burnish tarnish off these finishes.
Outside Dim 14"x 14"x 4.5"
Inside Dim 12"x 12"
Drain Opening 1 1/2" Opening - with drain INCLUDED ( American Standardized sizing and install / as well as Metric)
Edge Detail 1" Flat Edge
Mount Type Surface or under counter mount
Made by hand by Santa Clara Brass Hammered Brass Products
Sink Finish:
Drain Opening:
Quantity:
Product Description:
Includes : 14" Brass Round Bath Sink / or Bar / Beverage Sink - Smooth interior - lip is hammered, but not seen if under mounting or under counter mount.
Solid Brass Drain hand finished in our shop to match your sink finish &
Carnauba Wax and Polishing Cloths - Included - Everything you need!
*** Everyone is asking for smooth unhammered, I am adding new products every week as we make them. Our duo sinks have hammered lips on them because we use metal spinning to make our a lot of our product. Remember these are handmade, not pressing into shape or stamped. There are going to be slight imperfections in the surface of the sink due to producing them entirely by hand.
I suggest ordering polished and I will include our Professional Burnishing P96 pads if you want to adjust to a light matte or matte finish. just add note to add burnishing pads or just send me a message etc ect.
Unhammered solid Brass Round Bath/ Bar/ Powder Bath/ Beverage & anywhere you need a smaller sized sink... 14" made by Santa Clara Brass. Hand Made by our skilled artisans in our own shop in Santa Clara del Cobre, which specializes in hammered and smooth Brass products. All of our brass sink finishes are living finishes and will age naturally, they are non-lacquered, but come sealed with a natural beeswax polish we made in-house at our shop.
Care and Maintenance:
Shiny and matte finishes will naturally oxidize and tarnish, and the antique/ weathered brass finish can lighten over time with excessive use. You can use Barkeepers Friend and or a natural deoxidizer polishing paste like lemon juice and salt or in Mexico we use Valentina hot sauce (similar to Tasbasco hot sauce), to remove tarnish from a shiny sink. Most bronze and brass statues throughout Mexico are maintained by municipalities using hot sauce. A little paste wax and or beeswax polish will help maintain the finish longer.
Do not clean Antique / Weathered Brass with brass cleaners as they will lighten the finish. Mild soap and water is all that you need. 000 Steel Wool / or a green scour pad can be used to burnish tarnish off these finishes.
Outside Dim 14"x 14"x 4.5"
Inside Dim 12"x 12"
Drain Opening 1 1/2" Opening - with drain INCLUDED ( American Standardized sizing and install / as well as Metric)
Edge Detail 1" Flat Edge
Mount Type Surface or under counter mount
Made by hand by Santa Clara Brass Hammered Brass Products
Includes : 14" Brass Round Bath Sink / or Bar / Beverage Sink - Smooth interior - lip is hammered, but not seen if under mounting or under counter mount.
Solid Brass Drain hand finished in our shop to match your sink finish &
Carnauba Wax and Polishing Cloths - Included - Everything you need!
*** Everyone is asking for smooth unhammered, I am adding new products every week as we make them. Our duo sinks have hammered lips on them because we use metal spinning to make our a lot of our product. Remember these are handmade, not pressing into shape or stamped. There are going to be slight imperfections in the surface of the sink due to producing them entirely by hand.
I suggest ordering polished and I will include our Professional Burnishing P96 pads if you want to adjust to a light matte or matte finish. just add note to add burnishing pads or just send me a message etc ect.
Unhammered solid Brass Round Bath/ Bar/ Powder Bath/ Beverage & anywhere you need a smaller sized sink... 14" made by Santa Clara Brass. Hand Made by our skilled artisans in our own shop in Santa Clara del Cobre, which specializes in hammered and smooth Brass products. All of our brass sink finishes are living finishes and will age naturally, they are non-lacquered, but come sealed with a natural beeswax polish we made in-house at our shop.
Care and Maintenance:
Shiny and matte finishes will naturally oxidize and tarnish, and the antique/ weathered brass finish can lighten over time with excessive use. You can use Barkeepers Friend and or a natural deoxidizer polishing paste like lemon juice and salt or in Mexico we use Valentina hot sauce (similar to Tasbasco hot sauce), to remove tarnish from a shiny sink. Most bronze and brass statues throughout Mexico are maintained by municipalities using hot sauce. A little paste wax and or beeswax polish will help maintain the finish longer.
Do not clean Antique / Weathered Brass with brass cleaners as they will lighten the finish. Mild soap and water is all that you need. 000 Steel Wool / or a green scour pad can be used to burnish tarnish off these finishes.
Outside Dim 14"x 14"x 4.5"
Inside Dim 12"x 12"
Drain Opening 1 1/2" Opening - with drain INCLUDED ( American Standardized sizing and install / as well as Metric)
Edge Detail 1" Flat Edge
Mount Type Surface or under counter mount
Made by hand by Santa Clara Brass Hammered Brass Products
Product Description:
Includes : 14" Brass Round Bath Sink / or Bar / Beverage Sink - Smooth interior - lip is hammered, but not seen if under mounting or under counter mount.
Solid Brass Drain hand finished in our shop to match your sink finish &
Carnauba Wax and Polishing Cloths - Included - Everything you need!
*** Everyone is asking for smooth unhammered, I am adding new products every week as we make them. Our duo sinks have hammered lips on them because we use metal spinning to make our a lot of our product. Remember these are handmade, not pressing into shape or stamped. There are going to be slight imperfections in the surface of the sink due to producing them entirely by hand.
I suggest ordering polished and I will include our Professional Burnishing P96 pads if you want to adjust to a light matte or matte finish. just add note to add burnishing pads or just send me a message etc ect.
Unhammered solid Brass Round Bath/ Bar/ Powder Bath/ Beverage & anywhere you need a smaller sized sink... 14" made by Santa Clara Brass. Hand Made by our skilled artisans in our own shop in Santa Clara del Cobre, which specializes in hammered and smooth Brass products. All of our brass sink finishes are living finishes and will age naturally, they are non-lacquered, but come sealed with a natural beeswax polish we made in-house at our shop.
Care and Maintenance:
Shiny and matte finishes will naturally oxidize and tarnish, and the antique/ weathered brass finish can lighten over time with excessive use. You can use Barkeepers Friend and or a natural deoxidizer polishing paste like lemon juice and salt or in Mexico we use Valentina hot sauce (similar to Tasbasco hot sauce), to remove tarnish from a shiny sink. Most bronze and brass statues throughout Mexico are maintained by municipalities using hot sauce. A little paste wax and or beeswax polish will help maintain the finish longer.
Do not clean Antique / Weathered Brass with brass cleaners as they will lighten the finish. Mild soap and water is all that you need. 000 Steel Wool / or a green scour pad can be used to burnish tarnish off these finishes.
Outside Dim 14"x 14"x 4.5"
Inside Dim 12"x 12"
Drain Opening 1 1/2" Opening - with drain INCLUDED ( American Standardized sizing and install / as well as Metric)
Edge Detail 1" Flat Edge
Mount Type Surface or under counter mount
Made by hand by Santa Clara Brass Hammered Brass Products
Includes : 14" Brass Round Bath Sink / or Bar / Beverage Sink - Smooth interior - lip is hammered, but not seen if under mounting or under counter mount.
Solid Brass Drain hand finished in our shop to match your sink finish &
Carnauba Wax and Polishing Cloths - Included - Everything you need!
*** Everyone is asking for smooth unhammered, I am adding new products every week as we make them. Our duo sinks have hammered lips on them because we use metal spinning to make our a lot of our product. Remember these are handmade, not pressing into shape or stamped. There are going to be slight imperfections in the surface of the sink due to producing them entirely by hand.
I suggest ordering polished and I will include our Professional Burnishing P96 pads if you want to adjust to a light matte or matte finish. just add note to add burnishing pads or just send me a message etc ect.
Unhammered solid Brass Round Bath/ Bar/ Powder Bath/ Beverage & anywhere you need a smaller sized sink... 14" made by Santa Clara Brass. Hand Made by our skilled artisans in our own shop in Santa Clara del Cobre, which specializes in hammered and smooth Brass products. All of our brass sink finishes are living finishes and will age naturally, they are non-lacquered, but come sealed with a natural beeswax polish we made in-house at our shop.
Care and Maintenance:
Shiny and matte finishes will naturally oxidize and tarnish, and the antique/ weathered brass finish can lighten over time with excessive use. You can use Barkeepers Friend and or a natural deoxidizer polishing paste like lemon juice and salt or in Mexico we use Valentina hot sauce (similar to Tasbasco hot sauce), to remove tarnish from a shiny sink. Most bronze and brass statues throughout Mexico are maintained by municipalities using hot sauce. A little paste wax and or beeswax polish will help maintain the finish longer.
Do not clean Antique / Weathered Brass with brass cleaners as they will lighten the finish. Mild soap and water is all that you need. 000 Steel Wool / or a green scour pad can be used to burnish tarnish off these finishes.
Outside Dim 14"x 14"x 4.5"
Inside Dim 12"x 12"
Drain Opening 1 1/2" Opening - with drain INCLUDED ( American Standardized sizing and install / as well as Metric)
Edge Detail 1" Flat Edge
Mount Type Surface or under counter mount
Made by hand by Santa Clara Brass Hammered Brass Products