Santa Clara Brass 16" Round "Outback" bar sink Extra DEEP! with choice of drain opening and finish
$395.00
Product Description:
Handmade solid Brass Round Drum Bar/Kitchen Prep Sink 16" made by Santa Clara Brass. Hand Made by our skilled artisans in our own shop in Santa Clara del Cobre, which specializes in hammered and smooth Brass products. All of our brass sink finishes are living finishes and will age naturally, they are non-lacquered, but come sealed with a natural beeswax polish we made in-house at our shop.
This is an Extra deep sink, designed for a deeper bar sink project, or to be utilized in utility rooms where depth matters!
Only the lip is hammered and interior of the sink is smooth polished, * There are slight imperfections in the finish, I tried flawless smooth finishes before and everyone didn't believe me that they were handmade , they though they were stamped or pressed. All sinks I offer can come smooth with hammered lips, I hammer the lip due to the "metal spinning process we do and there is always some overlap on the lip detail that needs to be hammered out
Care and Maintenance:
Shiny and matte finishes will naturally oxidize and tarnish, and the antique/ weathered brass finish can lighten over time with excessive use. You can use Barkeepers Friend and or a natural deoxidizer polishing paste like lemon juice and salt or in Mexico we use Valentina hot sauce (similar to Tasbasco hot sauce), to remove tarnish from a shiny sink. Most bronze and brass statues throughout Mexico are maintained by municipalities using hot sauce. A little paste wax and or beeswax polish will help maintain the finish longer.
Do not clean Antique / Weathered Brass with brass cleaners as they will lighten the finish. Mild soap and water is all that you need. 000 Steel Wool / or a green scour pad can be used to burnish tarnish off these finishes.
Outside Dim 16"x 16"x 10"
Inside Dim 14"x 14" x 10
Drain Opening 2" Opening / and a 3 1/2" can be ordered as well
Edge Detail 1" Flat Edge
Mount Type Surface or under counter mount
Made by hand by Santa Clara Brass Hammered Brass Products
Handmade solid Brass Round Drum Bar/Kitchen Prep Sink 16" made by Santa Clara Brass. Hand Made by our skilled artisans in our own shop in Santa Clara del Cobre, which specializes in hammered and smooth Brass products. All of our brass sink finishes are living finishes and will age naturally, they are non-lacquered, but come sealed with a natural beeswax polish we made in-house at our shop.
This is an Extra deep sink, designed for a deeper bar sink project, or to be utilized in utility rooms where depth matters!
Only the lip is hammered and interior of the sink is smooth polished, * There are slight imperfections in the finish, I tried flawless smooth finishes before and everyone didn't believe me that they were handmade , they though they were stamped or pressed. All sinks I offer can come smooth with hammered lips, I hammer the lip due to the "metal spinning process we do and there is always some overlap on the lip detail that needs to be hammered out
Care and Maintenance:
Shiny and matte finishes will naturally oxidize and tarnish, and the antique/ weathered brass finish can lighten over time with excessive use. You can use Barkeepers Friend and or a natural deoxidizer polishing paste like lemon juice and salt or in Mexico we use Valentina hot sauce (similar to Tasbasco hot sauce), to remove tarnish from a shiny sink. Most bronze and brass statues throughout Mexico are maintained by municipalities using hot sauce. A little paste wax and or beeswax polish will help maintain the finish longer.
Do not clean Antique / Weathered Brass with brass cleaners as they will lighten the finish. Mild soap and water is all that you need. 000 Steel Wool / or a green scour pad can be used to burnish tarnish off these finishes.
Outside Dim 16"x 16"x 10"
Inside Dim 14"x 14" x 10
Drain Opening 2" Opening / and a 3 1/2" can be ordered as well
Edge Detail 1" Flat Edge
Mount Type Surface or under counter mount
Made by hand by Santa Clara Brass Hammered Brass Products
Sink Finish:
Drain Opening:
Quantity:
Product Description:
Handmade solid Brass Round Drum Bar/Kitchen Prep Sink 16" made by Santa Clara Brass. Hand Made by our skilled artisans in our own shop in Santa Clara del Cobre, which specializes in hammered and smooth Brass products. All of our brass sink finishes are living finishes and will age naturally, they are non-lacquered, but come sealed with a natural beeswax polish we made in-house at our shop.
This is an Extra deep sink, designed for a deeper bar sink project, or to be utilized in utility rooms where depth matters!
Only the lip is hammered and interior of the sink is smooth polished, * There are slight imperfections in the finish, I tried flawless smooth finishes before and everyone didn't believe me that they were handmade , they though they were stamped or pressed. All sinks I offer can come smooth with hammered lips, I hammer the lip due to the "metal spinning process we do and there is always some overlap on the lip detail that needs to be hammered out
Care and Maintenance:
Shiny and matte finishes will naturally oxidize and tarnish, and the antique/ weathered brass finish can lighten over time with excessive use. You can use Barkeepers Friend and or a natural deoxidizer polishing paste like lemon juice and salt or in Mexico we use Valentina hot sauce (similar to Tasbasco hot sauce), to remove tarnish from a shiny sink. Most bronze and brass statues throughout Mexico are maintained by municipalities using hot sauce. A little paste wax and or beeswax polish will help maintain the finish longer.
Do not clean Antique / Weathered Brass with brass cleaners as they will lighten the finish. Mild soap and water is all that you need. 000 Steel Wool / or a green scour pad can be used to burnish tarnish off these finishes.
Outside Dim 16"x 16"x 10"
Inside Dim 14"x 14" x 10
Drain Opening 2" Opening / and a 3 1/2" can be ordered as well
Edge Detail 1" Flat Edge
Mount Type Surface or under counter mount
Made by hand by Santa Clara Brass Hammered Brass Products
Handmade solid Brass Round Drum Bar/Kitchen Prep Sink 16" made by Santa Clara Brass. Hand Made by our skilled artisans in our own shop in Santa Clara del Cobre, which specializes in hammered and smooth Brass products. All of our brass sink finishes are living finishes and will age naturally, they are non-lacquered, but come sealed with a natural beeswax polish we made in-house at our shop.
This is an Extra deep sink, designed for a deeper bar sink project, or to be utilized in utility rooms where depth matters!
Only the lip is hammered and interior of the sink is smooth polished, * There are slight imperfections in the finish, I tried flawless smooth finishes before and everyone didn't believe me that they were handmade , they though they were stamped or pressed. All sinks I offer can come smooth with hammered lips, I hammer the lip due to the "metal spinning process we do and there is always some overlap on the lip detail that needs to be hammered out
Care and Maintenance:
Shiny and matte finishes will naturally oxidize and tarnish, and the antique/ weathered brass finish can lighten over time with excessive use. You can use Barkeepers Friend and or a natural deoxidizer polishing paste like lemon juice and salt or in Mexico we use Valentina hot sauce (similar to Tasbasco hot sauce), to remove tarnish from a shiny sink. Most bronze and brass statues throughout Mexico are maintained by municipalities using hot sauce. A little paste wax and or beeswax polish will help maintain the finish longer.
Do not clean Antique / Weathered Brass with brass cleaners as they will lighten the finish. Mild soap and water is all that you need. 000 Steel Wool / or a green scour pad can be used to burnish tarnish off these finishes.
Outside Dim 16"x 16"x 10"
Inside Dim 14"x 14" x 10
Drain Opening 2" Opening / and a 3 1/2" can be ordered as well
Edge Detail 1" Flat Edge
Mount Type Surface or under counter mount
Made by hand by Santa Clara Brass Hammered Brass Products
Product Description:
Handmade solid Brass Round Drum Bar/Kitchen Prep Sink 16" made by Santa Clara Brass. Hand Made by our skilled artisans in our own shop in Santa Clara del Cobre, which specializes in hammered and smooth Brass products. All of our brass sink finishes are living finishes and will age naturally, they are non-lacquered, but come sealed with a natural beeswax polish we made in-house at our shop.
This is an Extra deep sink, designed for a deeper bar sink project, or to be utilized in utility rooms where depth matters!
Only the lip is hammered and interior of the sink is smooth polished, * There are slight imperfections in the finish, I tried flawless smooth finishes before and everyone didn't believe me that they were handmade , they though they were stamped or pressed. All sinks I offer can come smooth with hammered lips, I hammer the lip due to the "metal spinning process we do and there is always some overlap on the lip detail that needs to be hammered out
Care and Maintenance:
Shiny and matte finishes will naturally oxidize and tarnish, and the antique/ weathered brass finish can lighten over time with excessive use. You can use Barkeepers Friend and or a natural deoxidizer polishing paste like lemon juice and salt or in Mexico we use Valentina hot sauce (similar to Tasbasco hot sauce), to remove tarnish from a shiny sink. Most bronze and brass statues throughout Mexico are maintained by municipalities using hot sauce. A little paste wax and or beeswax polish will help maintain the finish longer.
Do not clean Antique / Weathered Brass with brass cleaners as they will lighten the finish. Mild soap and water is all that you need. 000 Steel Wool / or a green scour pad can be used to burnish tarnish off these finishes.
Outside Dim 16"x 16"x 10"
Inside Dim 14"x 14" x 10
Drain Opening 2" Opening / and a 3 1/2" can be ordered as well
Edge Detail 1" Flat Edge
Mount Type Surface or under counter mount
Made by hand by Santa Clara Brass Hammered Brass Products
Handmade solid Brass Round Drum Bar/Kitchen Prep Sink 16" made by Santa Clara Brass. Hand Made by our skilled artisans in our own shop in Santa Clara del Cobre, which specializes in hammered and smooth Brass products. All of our brass sink finishes are living finishes and will age naturally, they are non-lacquered, but come sealed with a natural beeswax polish we made in-house at our shop.
This is an Extra deep sink, designed for a deeper bar sink project, or to be utilized in utility rooms where depth matters!
Only the lip is hammered and interior of the sink is smooth polished, * There are slight imperfections in the finish, I tried flawless smooth finishes before and everyone didn't believe me that they were handmade , they though they were stamped or pressed. All sinks I offer can come smooth with hammered lips, I hammer the lip due to the "metal spinning process we do and there is always some overlap on the lip detail that needs to be hammered out
Care and Maintenance:
Shiny and matte finishes will naturally oxidize and tarnish, and the antique/ weathered brass finish can lighten over time with excessive use. You can use Barkeepers Friend and or a natural deoxidizer polishing paste like lemon juice and salt or in Mexico we use Valentina hot sauce (similar to Tasbasco hot sauce), to remove tarnish from a shiny sink. Most bronze and brass statues throughout Mexico are maintained by municipalities using hot sauce. A little paste wax and or beeswax polish will help maintain the finish longer.
Do not clean Antique / Weathered Brass with brass cleaners as they will lighten the finish. Mild soap and water is all that you need. 000 Steel Wool / or a green scour pad can be used to burnish tarnish off these finishes.
Outside Dim 16"x 16"x 10"
Inside Dim 14"x 14" x 10
Drain Opening 2" Opening / and a 3 1/2" can be ordered as well
Edge Detail 1" Flat Edge
Mount Type Surface or under counter mount
Made by hand by Santa Clara Brass Hammered Brass Products